Can you replace the spindle on a torsion axle?
If you have an Eliminator Torsion axle you can replace the spindle. If the torsion arm is exposed on the backside, you can place the castle nut back on the spindle so that it is even with the end of the spindle, and then hitting the rear of the spindle to force the spindle loose. Remove the hub/spindle assembly.
How long do torsion axles last on a trailer?
Subject: RE: Rubber Torsion Axle Life Expectancy? the lifespan is 15-20 years…. no matter how many miles towed or how stored (weight off frame, etc.)
Do torsion trailer axles wear out?
Helpful Expert Reply: It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle.
When should a trailer spindle be replaced?
If the spindle is damaged then the bearings won’t ride properly and can fail again or it can cause other problems such as uneven or excessive tire wear and ride quality problems. If the spindle is damaged then you can’t really repair it and the whole axle should be replaced.
Can a torsion axle be repaired?
Torsion axles use internal rubber cords to provide the suspension motion and they really are not practical to repair/rebuild. Certainly any axle that was damaged in an accident should be replaced purely for safety reasons.
Are torsion axles worth it?
Torsion trailer axles offer a smoother ride and less maintenance. Leaf springs are more durable, less expensive and far easier to replace parts on. Selecting the proper axle is as simple as determining your application, and figuring out the loads you need to carry.
How can you tell if a spindle is bad on a trailer?
Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won’t ride properly and can fail again or it can cause other problems such as uneven or excessive tire wear and ride quality problems.
How do you know if your spindles are bad?
The Four Signs the Spindles are Malfunctioning
- The Lawn Will Have Uneven Cuts. The first and most noticeable problem when the spindles go out is the yard is cut uneven.
- There Will Be a Squealing Noise.
- If There is Vibration and Buzzing Noises.
- Broken or Bent Parts Can Mean the Spindle is Worn.
