Do you finish a maple fretboard?
Unlike Rosewood and Ebony maple fretboards do require sealing. If your neck is maple along with your fretboard you can finish your neck and fretboard at the same time. If using lacquer, you will need to apply your finish and then cut away the build up on top of the frets, so the fret wires are exposed.
Are Fender maple necks finished?
Today’s Fender maple necks usually have either a polyurethane or polyester finish. However, on some special edition models or reissues, Fender does use a nitrocellulose lacquer finish for the sake of authenticity, and you can certainly expect that to darken somewhat over the years.
What do you put on a maple fretboard?
Finished or glossy maple fretboard
- Use a dry, lint-free microfiber cloth to wipe grime and moisture from in between and around the strings.
- Loosen or remove the strings for a deeper clean or to apply a light guitar polish. Allow the polish to sit for a few minutes before wiping dry with another microfiber cloth.
What do you put on maple neck?
Maple fretboards are finished with an impermeable coat: Poly, some Tung Oil formula, etc. so it doesn’t need the Lemon Oil that is used to condition the unfinished Rosewood fretboard.
How do you treat a maple fretboard?
Finished or glossy maple fretboard
- Use a dry, lint-free microfiber cloth to wipe grime and moisture from in between and around the strings.
- Loosen or remove the strings for a deeper clean or to apply a light guitar polish. Allow the polish to sit for a few minutes before wiping dry with another microfiber cloth.
What maple does fender use?
Due to its stiffness and therefore stability, hard rock maple (Acer saccharum/Nigrum) has become the main wood for building bass and guitar necks, bolt on or neck through since Leo Fender introduced it in larger scale production in 1954 on the Telecaster.
What finish does fender use on guitar necks?
Fender continues to use urethane finishes on many of its instruments (American Standard Series, various artist models), with variants including flatter satin urethane (necks on Deluxe, Standard, Highway One, American Deluxe and American Standard models) and thicker, shinier gloss urethane (American Specials, Ritchie …
What do you put on an unfinished maple fretboard?
“We recommend using the Ernie Ball Wonder Wipes fretboard conditioner for general cleaning of the fretboard (during string changes). Murphy’s Oil Soap can offer a bit deeper of a cleaning if it’s really dirty, but should be used in minimal amounts (apply to an instrument cloth to rub onto the fretboard).
