How do I find my Panasonic TV code?


  1. Turn on the TV.
  2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
  3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
  4. Verify by pressing the VOLUME + button.
  5. Press the TV button to store the 3, 4, or 5 digit code.

What is the brand code for Panasonic TV?

4. Enter the 3-digit Device Code (for example: code 005 under Panasonic TV). If the LED turns off, the code has been accepted by the remote control.

How do I program my Panasonic remote to my Panasonic TV?

How to Program the Panasonic TV Remote

  1. Hold down both the “Action” and “Power” buttons on the remote at the same time for at least five seconds.
  2. Push the button of the component you want to program to the remote control.

How do you program a remote to a TV with a code?

Auto Code Search

  1. Turn on your TV or another device you wish to control.
  2. Press and release the DEVICE button on your remote that is associated with the product you want to control (TV, etc.).
  3. Press the Device Button again, as well as the POWER button at the same time.
  4. Release both buttons.

How do I setup my Panasonic remote?

Program Each Device Simultaneously press the “Power” and “Action” buttons on your remote. Hold the buttons down for five full seconds before releasing. This enters the remote into programming mode. Press the first device button and enter the corresponding code.

How do you set up a Panasonic universal remote?

Press and hold down both the “Power” and “Action” buttons simultaneously for approximately 3-10 seconds. Locate your device buttons, which should be the top square of buttons on the right side of your remote control. Press the component button that describes the device you desire to program.

What are the codes for a Panasonic television?

The two codes for Panasonic TVs are “0250” and “0051.”. The “TV” key flashes twice after you enter the last digit to indicate the code entered is correct. Aim the Comcast remote at your Panasonic TV and press the “Power” key.

What are the sharp TV remote codes?

The TV codes for sharp TV are 173, 095, 171, 004, 006, 012, 029, 111, 112, 113, 12. These codes can be also used to set a universal remote for sharp TV.

What are Sansui remote codes?

How to Get Sansui TV Universal Remote Control Codes First “activate device” Now hold down the “Setup” button Enter the code “9-9-1” (three digits) Now hold down the power button on the remote and press channel up until the device turns off your TV.

What is the Coby TV codes for a Comcast remote?

Coby TV codes for Comcast universal remote controls: 5 digit codes (XR2, XR5, XR11) for newer Xfinity remotes. 12017 12256 12257. 5 digit codes (Digital Adapter Remote) MUG3067. 12017. 5 digit codes (Spectrum & Tracer) MG3-4167 & M4167.