How do I remove the ink from my Epson L355?

To get to the tray compartment that holds the ink pads, first turn over the printer so that the back of the Epson L355 printer is facing upwards to you. Lift up the back paper tray. You will see a single screw that secures the tray in place. Unscrew it then pull the tray out vertically towards you.

How use Epson L382 Resetter?

How to use Epson L382 Resetter Program.

  1. Download the above Epson L382 resetter program first.
  2. Turn off your antivirus protection for a while.
  3. Unzip the Epson L382 Resetter Tool file into a folder.
  4. In that folder double-click on ‘Adjprog-esk.exe’ file to run this software.

How charge Epson L382 ink?

Fill the ink tanks as described on the Start Here sheet. Turn on the product and press the ink button for 3 seconds until the power light starts flashing and ink charging begins. Wait until the power light stops flashing and charging is complete after about 20 minutes.

How to reset the resetter on the Epson l355 printer?

How to Reset Epson L355 Printer: Turn on the printer and connect the USB cable Download Resetter Epson L355 Resetter Extract file Open AdjProg.exe – Accept Particular adjustment mode Waste ink pad counter – OK Give checkbox Main Pad Counter and Platen Pad Counter Click Check – OK Click

How to reset the l355 ink pad counter?

To reset the L355 ink pad counter, click in the Main pad counter check box to select it and then click on the Initialization button. Thus would start the process of resetting the ink pad counter to zero.

How to reset the waste ink pad on an Epson printer?

Epson L355 Software for Resetter Adjustment is a program that can be used to reset your printer’s waste ink pad counter. Now your printer displaying the “Service Required ” message, you can use this software to reset the factory condition printer. How to Reset Epson L355 Printer: Turn on the printer and connect the USB cable

Is the Epson L 355 a tank printer?

Epson L 355 is a well built-in tank printer. Today we’d share your Epson L series printer’s resetter tool (Adjustment Program). Using this method you can easily reset your Epson L series (L355) printer. To execute the Epson L355 counter reset program you will follow the steps below.