How do I reset my HP 4700 fuser?

Basically all you must do is install a replacement fuser from us, then turn on your printer, and the power-on process will automatically reset the page count for you. To ensure this process works correctly, double-check that your printer’s power is off before you install the new fuser.

How do you reset a fuser?

Reset Fuser

  1. Press the [Machine Status] button on the Control Panel.
  2. Select the [Supplies] tab on the Touch Screen.
  3. Select the [Fuser] button.
  4. Select the [Reset Counter] button and then the [Yes] button to reset the Fuser.
  5. Select the [Close] button to return to the default (Copy) screen.

How do you reset the fuser on a HP CP4025?

HP Color LaserJet CP4025 reset the fuser page count Basically all you must do is install a replacement fuser from us, then turn on your printer, and the power-on process will automatically reset the page count for you.

How do I reset my HP fuser?

How To Reset The Fuser Page Count on The HP Color LaserJet M553 Printer

  1. Select the MANAGE SUPPLIES menu.
  2. Select the RESET SUPPLIES submenu.
  3. Select the option for NEW FUSER KIT.
  4. When it says NEW FUSER KIT = NO / YES, select YES.
  5. Press OK to save that selection.

How do I clear the message Fuser error or self diagnostic machine will restart in 15 minutes error?

The error message SELF-DIAGNOSTIC – Will Automatically Restart within 15 minutes appears when the machine is not detecting the proper temperature in the fuser unit. This message may clear after turning the machine off using the power button on the control panel and unplugging the power cord.

How do I reset my printer ITB?

Now you can reset the New Transfer Kit setting At the control Panel, press the Home button. Open the “Administration” menu, then choose “Manage Supplies”. Select the “Rest Supplies” option, and then choose “New Transfer Kit.” Use the Down Arrow button to highlight the word “Yes”, and then press Ok to select it.

How do I reset my ITB?

4525 ITB Reset

  1. Clean the New ITB sensor flag thoroughly with canned air and pull the flag toward you to make sure it swings freely.
  2. Use a pen or paperclip to press in the center hole on the side of the new ITB while turning the white Alienation Gear clockwise. (
  3. After a few turns the ITB reset flag will reappear.