How do I reset my Plantronics CS55?

To reset your CS50/CS55/CS60:

  1. Press in and hold the mute control (A) and the talk button (B) until the talk indicator light (C) on the headset starts blinking rapidly.
  2. Press and hold the talk button (B) again.
  3. Disconnect the AC power supply from the bottom of the base.
  4. Test the headset to ensure it works properly.

How do I setup my Plantronics headset CS55?

Press straight down and hold on the mute button on your CS50 or CS55 wireless headset until a solid green LED light appears, then release. Red light will go solid and green light will go out, your headset is now paired.

Why can’t I hear anything on my Plantronics headset?

Unable to Hear Caller or a Dial Tone The headset battery may need to be charged. The USB Bluetooth adaptor may not be set as the default audio device. Use the audio settings in Windows under Sounds and Audio Devices to select “Plantronics BT Adaptor” as the audio device. The listening volume may be too low.

How do I resync my Plantronics headset?

Begin with the headset turned off. Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue.

How do I reset my Plantronics earpiece?

Reset Plantronics Bluetooth Headset

  1. Remove the Plantronics headset from your cell phones paired devices.
  2. Power your cell phone off, then power it back on.
  3. Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
  4. Your Plantronics headset should now be reset.

How do I reprogram my Plantronics headset?

How do I pair my Plantronics headset with base?

To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Plantronics Bluetooth headsets.

How do I get my Plantronics headset to work?

Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.

Why does my headset randomly stop working?

Sounds like the cable might be damaged. Have you tried wiggling the wire near where the plug is in? If it is damaged, the sound should cut in and out in one or both sides of your headphones. If that is the cause, you will need to cut the cable about 2cm or so above the plug and resolder another plug onto it.

Why is my Plantronics microphone not working?

If your microphone is not working, check the following: Make sure that the microphone is not muted. Make sure the USB connection is not loose. Wait for your computer to recognize the USB connection, and then test the microphone again. Make sure that your Plantronics headset is selected as the default audio device.

Why is my Plantronics not connecting?

If the headset is listed in your cell phone’s list of paired devices, but will not connect to the phone, please try the following: Delete the headset from your cell phone’s list of paired devices. Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone.

How to adjust listening volume on Plantronics CS55?

Minor Adjust Major Adjust Rock the headset volume control back and Use listening volume major adjust forth to adjust listening volume in minor control on the back of the base for large incremental adjustments. Incoming call Press call control — notification* button to answer call *Only works when using optional Handset Lifter.

What do the base indicator lights on the CS55 do?

BASE INDICATOR LIGHTS CS55 Action Tone Charging Ascending/descending tones, 2 tones at limit Fully Charged Power 3 mid tones = Mute… • Check that the AC charger is securely connected to a working come on. wall outlet.

Is the CS50 the same as the CS55?

Plantronics, the logo design, CS50, CS55. IntelliStand, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners.

How do you answer a phone call in Plantronics?

Dial using the telephone keypad. To answer a call: 1. To make/answer a call: 1. Press the call control button to raise the handset lifter. 2. Use the telephone keypad to dial the number. To end a call: Press the call control button to lower the handset lifter. (Phone will hang up.)