How do you reset the anti theft system on a 1999 Ford Explorer?

First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.

How do you reset the anti theft system on a Ford Explorer?

To reset the alarm on the Ford Explorer You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.

How do I get my Ford out of security mode?

You’ll need two progRammed keys to perform the reset. Put one into the ignition, and turn it to “ON”. Cycle it back to “OFF” and remove. Immediately insert the second key (within 5 seconds) and cycle it to “ON” and “OFF” as well.

How do you turn off the anti theft system on a 2000 Ford Explorer?

Allow the driver’s door to be locked for at least 30 seconds, then use the key in the door cylinder to unlock it. This should clear anything that is wrong with the alarm system.

How do I reset my Ford factory alarm?

How do I reset my Ford alarm?

  1. Examine the remote entry key and find the loudspeaker icon. Press this icon to turn on the personal alarm.
  2. Press the loudspeaker icon one more time or put the key into the ignition and turn it to the “On” position to reset the alarm.

Is there a way to bypass the anti theft?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Hold the key for 30 seconds in the position. That will tell the system you have the right key, and it will enable you to be able to bypass the car’s alarm system.

How do I bypass Ford Anti theft system?

Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.

How do you turn off the alarm on a 1998 Ford Explorer?

switch the key on and off 8 times and the doors should lock. If not, Repeat the key on and off 8 times until you do hear the door locks energize. Then hit the lock button on your fob.