How does Power Commander V autotune work?
Once installed, the Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. models of bikes, it is also possible to adjust the Air/Fuel ratios “per gear”.
Does Power Commander add horsepower?
Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque. This will often give an increase in overall horsepower.
Is Power Commander V bike specific?
No. The connectors are different for each injection system on each bike. In theory you can snip the old connectors off and wire up new ones.
Can any power commander be used?
Life Member. Yes, you can move your PCV to the other bike as both bikes use the same one (Part # 15-011). You will however need to go to the Power Commander website and download a new map to the PCV that matches your current setup for the 2012.
How do you get maps on Power Commander V?
How do I load two maps on my Power Commander V
- Enable the option in the Power Commander software.
- Check the box for Map Switch, and then click OK.
- Next, you need to open a second map, and then click Send Map.
- You should be prompted to choose Position 1 or 2.
- Now you should have two map positions.
Why do I need a power Commander V?
The Power Commander V is a unique fuel tuning device because it can monitor and maintain your air/fuel ratio without directly changing the ECU. To reinstate your stock settings, all you need to do is uninstall the device, and you’re done.
What does the power commander tuning device do?
Our Power Commander tuning device is a powerful device that can completely overhaul your driving experience. Attached to your vehicle as a piggyback device that optimizes your air/fuel ratio, this device can then be easily uninstalled to return to stock settings.
How to configure quick shifter in power Commander V?
Please follow the instructions below to configure your Quick Shifter. Select Power Commander Tools > Configure > Quick Shifter Single Time – uses the same shift kill time for all shifts Gear Dependent – allows a different shift kill time for each gear change. Gear Dependent requires a gear indicator set-up.
What does a power commander do for a motorcycle?
In most cases, a power commander helps the bike get close to the optimum level faster than the stock specifications. For example, if a motorcycle optimization level is 65% to 70%, it increases up to 80%-90% when the power commander is plugged in. The difference helps the rider to catch up the speed faster.
