How many points do you need to pass a CDL pre trip inspection?
Pre-trip must be passed before skill/road tests are taken. To pass the skills test, you must have no more than 12 errors overall.
What should you do at the beginning of your lighting inspection?
Get Out and Check Lights:
- Left front turn signal light clean, operating and proper color (amber or white on signals facing the front).
- Left rear turn signal light and both stop lights clean, operating and proper color (red, yellow or amber).
Why put the starter switch key in your pocket during pre trip inspection?
Why should drivers put the starter switch key in your pocket during the pre-trip inspection? To prevent the trailer from coming loose and rolling down an incline. To prevent electric shocks when checking the motor. To prevent injury from a running motor or other moving parts.
How to do a Class B pre trip inspection?
Class B Pre-Trip Inspection. Point to, or touch, every item that you are inspecting. Tell the tester how you know that the part you are. 1. inspecting is in good, safe working condition. Identify all defects or you may not receive credit.
When to use a Class B CDL inspection?
Class B CDL pre-trip inspections can be used by driving institutions to train license takers, refresh licensed truck/bus drivers, and by private or public institutions as a regular pre-trip inspection by using class B vehicles (e.g., straight trucks, buses, garbage trucks, dump trucks, delivery trucks and cement mixers.)
Why does a school bus need a pre trip inspection?
School buses are classified as commercial vehicles that require pre-trip inspections to ensure roadworthiness. Performing a pre-trip inspection is paramount to keep an eye on the following crucial defects: Oil leaks can cause catastrophic engine failure when left unchecked.
What to look for in a CDL inspection?
In performing a Class B CDL pre-trip inspection, it is imperative to determine any defects. Below are some bus defects that driver’s should pay attention to.
