How much does it cost to fix a rear wheel bearing?

The cost of a complete rear wheel bearing replacement will be somewhere in area of $240 to $460. Parts will on average be between $100 and $180. The labor costs will be around $140 to $280.

How do I know if my Tacoma wheel bearings are bad?

first try to wiggle the tire back and forth and see if you feel a slight movement. second spin the tire and listen closely and see if you can hear like a grinding sound coming. a good bearing wont make a sound, the tire will spin quietly, a bad bearing will have like a grinding type of sound.

Should I replace both wheel bearings at the same time?

Both wheel bearings have racked up the same number of miles, so it’s logical to conclude that both sides have probably experienced the same amount of wear. Based on this line of thinking, it would make sense to recommend replacing both wheel bearing hubs at the same time even though only one has obviously failed.

What does a bad wheel bearing sound like on Toyota Tacoma?

Any type of rumbling or chirping sound coming from the area around the wheels may indicate a bearing problem. Inspect them immediately because a failed bearing can result in a lost wheel. Bearing noise will not change when the vehicle speeds up or down, and it is proportional to the speed of the vehicle.

How do you check wheel bearings on a Toyota Tacoma?

In order to check the bearing, grab the tire at the 12 and 6 clock positions and rock it. There should be no play at all in most front-wheel-drive cars. Rear-wheel-drive cars may have a 0.010-inch play. Rotate the tire and listen for noise or rough sounds coming from the bearing.

What do I need to change wheel bearings on Toyota Tacoma?

Put a new one on and torque to the specifications. These bearings are more of a challenge, and you may need a hydraulic ram or wheel bearing tool. The wheel bearing tool allows you to get the bearings off without removing the knuckle. With the wheel on the ground, get the hub nut loose. Lift the vehicle and remove the wheel.

Why does my Toyota Tacoma wheel make a noise?

When your bearings start to give you trouble, the first thing you may notice is noise. Any type of rumbling or chirping sound coming from the area around the wheels may indicate a bearing problem. Inspect them immediately because a failed bearing can result in a lost wheel.

What to do if your wheel bearing is making a noise?

Rotate the tire and listen for noise or rough sounds coming from the bearing. If you do find that you need to replace one set of bearings, be sure and check all the other bearings. With a vehicle with a sealed bearing, if you find play in it, you need to replace it.