How much is a 289 HiPo worth?

289 HiPo/HiPo s can go for 4500 to 15K depending on setup, history and condition. It’s a 6 bolt.

How much horsepower does a 289 HiPo have?

Powered first by a 260-inch version, the Mustangs eventually received the larger and more powerful 289. Offered in a number of different power levels, the most powerful and now sought after was the HiPo 289. Rated at 271 hp and 312 lb-ft of torque, they command premium prices, especially in fast-back guise.

How do I identify a 289 hipo head?

Two dots, not one, cast into the head, valve spring cups cast into the heads, and treaded, not pressed in, rocker arm studs. Those are the easy ways of telling at a glance.

How can you tell if you have a hi po 289?

Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.

How much horsepower does a 351 Windsor make?

Ford 351W V-8 Specs

Engine: Ford 351W V-8 (5.8L)
Peak Horsepower: • 1969 – 250 hp w/ 2 barrel carburetor, 300 hp @ 5,400 rpm w/ 4 barrel carburetor • 1972 (net power ratings adopted) – 153 hp w/ 2 barrel, 161 hp w/ 4 barrel • 1997 – 205 hp (CA version), 210 hp @ 3,600 rpm • Ford Lightning – 240 hp @ 4,200 rpm

How do I identify a 289 HiPo head?

How do you tell if an engine is a 289 or 302?

Just codes. The 289 would be “1M”, and the 302 would be “2M”, or “2MA”. Pull the oil pan and you’ll know.

What does K-code mean on early Mustangs?

The “K” in K-code Mustangs refers to the engine: a durable, lightweight “Hi-Po” V-8, featuring just enough special equipment to help it make an official rating of 271 hp. Until 1967, it was the top engine option available to Mustang.

When did the Ford 289 engine come out?

1965 Ford 289 engine block, heads, crank, exhaust manifolds and original 4 barrel manifold. I removed this engine from a 65 mustang 4 speed car. I disassembled this engine 20 years ago and it’s been in my storage shed since. The block code numbers are c5ae 6015 e. And build date code 4k24 (October 24, 1964).

What was the date on the 1966 Mustang HIPO?

Correct Hipo heads with date code 6B28 (Feb 28th 1966, only checked the left head date code) and the number 21 on both heads. Correct dual point distributor. Correct Hipo damper. Correct 4 blade fan. Correct exhaust manifolds. Correct number matching 4 speed Transmission.

What kind of head does a Ford 289 have?

Speedmaster heads, Ford 289 ,302,351w Part# 746-PCE281.1761Plugs are rc12yc, within that heat range.Brand new intake valves and studs included. No springs or hardware Painted blackCast iron60cc Combustion Chamber180cc Intake Runner1.940 in. Intake Valve1.5500 in. Exhaust Valve20 deg. Valve AngleUsed for a start up only then removed.

Is the Ford 289 2 barrel for sale?

The condition of the motor and trans are unknown. This would be a restoration project. For sale is a used Ford 289 2 barrel pulled from a Falcon Futura with approx. 45k miles on it. Was last ran around 5 years ago.