How much pH increaser should I add to my hot tub?

Determine the pH level of the water using a water test strip. Add 1 tablespoon of baking soda to the hot tub for every 100 gallons of water it holds. For example, add 4 tablespoons of baking soda to a hot tub that holds 400 gallons of water.

Is pH plus the same as baking soda?

Why Use Baking Soda In A Pool? Baking soda (sodium bicarbonate) is also an alkaline substance, but with a lower pH level of 8 – commonly used to increase pH and total alkalinity. In fact, most pH Increaser products are just baking soda in a fancy bottle!

What is in pH increaser for spas?

pH & Alkalinity Increaser is sodium bicarbonate (also called sodium hydrogen carbonate). It raises Total Alkalinity, and pH which is too low.

Is soda ash and pH up the same thing?

Also known as sodium carbonate or soda ash, Pool & Spa pH Increaser raises low pH and restores ideal swimming conditions.

What to add to hot tub if pH is low?

There are two main chemicals typically used to decrease pH in hot tubs, muriatic acid and dry acid (also known as sodium bisulfate). Although they are designed to do the same thing, pay attention to which chemical you are using, because how you add the chemical differs.

How do I raise the pH in my hot tub without raising alkalinity?

Use Aeration to Raise Pool pH (and not Alkalinity) You can’t, but you can raise pH without affecting Alkalinity. This is done by lowering the pH and Alkalinity with pH Decreaser, then raise the pH through aeration. Just add air!

What is a pH increaser?

pH Increaser Is The Chemical That Raises pH Levels! It is the measurement of how acidic or basic the water is on a scale of 0-14, where 0 is completely acidic, 14 completely basic and 7 being neutral. The optimum range for your pool is between 7.2 – 7.8, with 7.4 being ideal which is the pH of your eyes.

What is pH increaser made of?

PH increaser is a swimming pool industry term which describes any substance designed to raise the pH of swimming pool water, typically made from soda ash or baking soda.

What happens if pH is low in hot tub?

A low pH level means your hot tub water is acidic, which can not only cause corrosion of surfaces and equipment, it can also reduce your ability to control Total Alkalinity and cause an uncomfortable experience for your family and guests, as acidic water will sting eyes and remove the natural oils on skin, leaving it …

Can I use baking soda instead of pH up?

Adding baking soda will also raise your pool’s pH level some, but if your main goal is to raise the pH versus simply raising alkalinity, we recommend using soda ash (available at most pool supply stores) in lieu of baking soda.

Does baking soda increase pH?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.

Will baking soda increase pH in Spa?

As many homeowners know, the ideal pH for a hot tub or pool should be between 7.2 and 7.8. Baking soda can raise the alkalinity of the water and bring your pH back up to an appropriate level.