What does a 6V6 tube do?

GE 6V6GTA (Wafer base) Over the next two decades the 6V6 tube became widely used in small radios, hifi amplifiers and consoles, and instruments amps. In single-ended tube amps one 6V6 output tube can produce about 5 watts of power. In push-pull tube amplifiers 15W is typical.

What amps use 6V6 tubes?

Here are a few amps which use the 6V6 valve:

• Fender Deluxe Reverb.
• Fender 68 Custom DeLuxe reverb.
• Fender Champ.
• Marshall DSL15.
• Orange Rockverb 50.
• Laney Cub10.

What is the difference between 6L6 and 6V6 tubes?

What is the difference between 6L6 and 6V6 tubes? The 6v6 is only designed for a max signal power of 5 watts output while the 6L6 can handle 10.8watts of maximum power output. If you want more headroom use the 6L6 (higher wattage tubes), if you want to break up at a lower volume, use the 6V6.

Are 6V6 and 6L6 interchangeable?

The 6L6 and 6V6 share the same pinout and are compatible in equipment specifically designed to use either one. The 6L6 may be used in most 6V6 audio applications if the heater supply will handle the increased current. In a single ended amp designed conservatively for the 6V6 a 6L6 probably will work fine.

What is a 6V6 amp?

6V6 power tubes are typically used in low-wattage guitar amplifiers, known for their loose lows and sweet highs. Less powerful than their popular 6L6 counterparts, 6V6s lend themselves well to low-wattage amps and break up more easily at high volumes.

How much current does a 12AX7 draw?

What is 6V6 amp?

Are 6L6 and 5881 tubes the same?

You can immediately notice that the 6L6 and 5881 are in the same family of valves. They are part of the general evolutionary process for this particular valve. So they are similar, but not identical tubes. In other words, there are no 6L6 tubes which are identical to the 5881 tube.

Are 6V6 and EL34 interchangeable?

I wouldn’t use a 6V6 in place of an EL34, because it might not survive very long. Two better choices would be KT77 or 6CA7.

Do power tubes affect tone?

It has no effect on the sound. This phenomenon only happens in a tube with better-than-average vacuum (pure). Therefore, the tube is actually a better-quality tube!

How many watts is a 12AX7 tube?

Which is the best 6V6 power tube to buy?

The Genalex 6V6 is one of the best power tubes that have plenty of smooth overdrive. These are reliable and give a better tone and exhibit all the features that true 6V6’s are popular for, such as a chime, harmonics, warmth, and clarity.

How many Watts Does a 6V6 AMP produce?

In single-ended tube amps one 6V6 output tube can produce about 5 watts of power. In push-pull tube amplifiers 15W is typical. Although Fender is best known for their 6L6 tube amp designs, they have had huge success with the Champ, Princeton, and Deluxe tube amps that all use 6V6GT output tubes.

When was the first 6V6 vacuum tube made?

RCA released the first 6V6 vacuum tube in the late 1930s. Its low price and good performance made it impossible to ignore. Over the next two decades the 6V6… More Details Over the next two decades the 6V6 tube became widely used in small radios, hifi amplifiers and consoles, and instruments amps.

What kind of distortion can a 6V6 tube produce?

And not just mush, but a very controllable, musical distortion. A well tuned amp running the JJ 6V6 and getting a good strong signal from your guitar may make you want to cash in your old TS808. One rig that was used as a tester consisted of a ‘66 Deluxe Reverb fitted with a Celestion Vintage 30.