What does BS mean on Yuasa Battery?

Yuasa AGM Batteries leave the factory in one of two ways: Factory Activated (FA) or Bottle Supplied (BS).

How do you maintain a Yuasa Battery?

Storing Your Yuasa Battery Check the battery every month (for Conventional types) and every three months for AGM batteries. For long storage or infrequent use, disconnect the battery cables from the vehicle to eliminate battery drain from electrical equipment.

How long does it take to charge a Yuasa battery?

Test the battery’s charge using a voltmeter. Batteries that read 9.75 volts or higher will require 3-6 hours charging. Those between 3.25 volts and 9.75 volts will require roughly 5-11 hours. Batteries below 3.25 volts will need to be charged anywhere from 13-20 hours.

What does the BS stand for on battery?

The two letters after the hyphen signify the type of the battery, as in whether it is conventional or sealed. The BS means Battery Sealed. A sealed battery is one that’s filled with acid and sealed after filling. It can be used in any orientation and is offers easier maintenance.

What does BS mean on a battery?

How long do you charge a new Yuasa battery?

For example, if the battery has a voltage of 12.16V, charge it for 10 hours at the recommended charge rate….Charging Procedure with Constant Current Chargers.

How do I keep my bike battery charged?

Regular charging The battery should be regularly charged even during long periods of non-use. Discharging the battery in an idle state can harm the battery; therefore, keep charging the battery every month even if it is not used for a long time.

How long should a battery hold a charge?

If you’re dealing with a fully charged battery that’s relatively new and in perfect condition, it will take 2-3 months for it to lose its power completely. However, you’re probably pushing your luck if you let it sit idle for more than two months.