What does error 0XEA mean?
Error 0XEA is a serious but common error of Epson Printers. This error occurs when the carriage caddy is jammed due to some packaging material stuck inside. Error Code 0XEA also appears when the Cartridges are not seated and installed correctly.
How do I fix Epson communication error?
Rebooting System
- Simply turn off your PC or laptop device.
- Remove and disconnect all USB connections.
- After waiting for 3-5 minutes.
- Turn on your PC and connect it to the Epson printer using the USB cable.
- Many times, this system reboot solves the “Epson printer communication error”.
How do I fix error code 000043 on my Epson printer?
Inspect the paper piece
- Generally, Epson Printer Error 000043 and Epson Printer Error 00033 are triggered by paper jam issue.
- Gently pull out the paper tray and sheet feeder.
- Press the ‘Start’ button to resume printing.
- Press the power button to turn off the printer.
- Lift the scanner unit and clean up the mess.
Why does my Epson printer say in error state?
If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.
How do I fix Epson error code 0X69?
Simple Steps to Repair Epson Printer Error Code 0X69
- Turn ON the Printer and turn it OFF just after it starts boosting.
- Now wait for 15 Minutes and turn ON your printer again.
- Check if the Epson Error 0X69 is fixed or not.
What does error code 0x97 mean on Epson printer?
hardware malfunction error
The Epson printer error code 0x97 is a hardware malfunction error, which means that your printer is essentially non-operational. Epson will replace your printer if they can’t help you fix it. It would be best to take advantage of your warranty before anything else.
Why is my Epson printer having communication error?
Your computer may not be properly connected to the printer. Check both ends of the interface cable between the printer and the computer. You may not be using the correct interface cable. If you are using the USB interface, use a Revision 1.1 or 2.0 cable.
Why does my Epson scanner says communication error?
An incorrect IP address in Epson Scanner Settings may also cause the EPSON Scan Cannot communicate with the scanner issue. To make sure you have the right IP address on your Epson scanner: On your keyboard, press the Windows logo key and E at the same time, then right-click on your Epson device and click Properties.
How do I contact Epson tech support?
To speak to a technical support representative, dial: U.S.: (562) 276-7282, 6 am to 8 pm, Pacific Time, Monday through Friday and 7 am to 4 pm, Saturday.
