What happens when 8 bits are transferred in the SPI?
What happens when 8 bits are transferred in the SPI? Explanation: The interrupts are locally generated when 8-bits are transferred so that the data can be read before the next byte is clocked through. Explanation: The slave select signal selects which slave is to receive data from the master.
What is the operating voltage of LPC2148?
3.0 V to 3.6 V
ARM Development Board, LPC2148
| Model Number | LPC2148 |
|---|---|
| CPU Operating Voltage | 3.0 V to 3.6 V |
| Data Memory | 32 KB + 8 KB (SRAM) |
| Minimum Order Quantity | 5 Piece |
CAN protocol in lpc2148?
CAN bus is a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other within a vehicle without a host computer. The CAN communication protocol is a CSMA/CD protocol.
How to connect SPI-can to LPC2148 Advanced Development Board?
The Flash Magic software is used to download the hex file into your microcontroller IC LPC2148 through UART0. Give +3.3V power supply to LPC2148 Advanced Development Board; the SPI-CAN device is connected with LPC2148 Advanced Development Board. Here we are using Master and Slave LPC2148 Advanced Development Board for CAN transmit & receive.
What are the features of the LPC2148 microcontroller?
The main features of LPC2148 include the following. The LPC2148 is a 16 bit or 32 bit ARM7 family based microcontroller and available in a small LQFP64 package. ISP (in system programming) or IAP (in application programming) using on-chip boot loader software.
What are the GPIO pins in LPC2148?
The initial step toward lpc2148 programming is an arrangement of GPIO Pins. So here are the related concepts as well as registers. The general purpose I/O port pins in LPC2148 includes P0.0 to P0.31 and P1.16 to P1.31, and actually, these pins are available based on the alternate function utilization.
How is SPI used in a microcontroller?
Serial Peripheral Interface (SPI) is a synchronous serial data protocol used by microcontrollers for communicating with one or more peripheral devices quickly over short distances. It can also be used for communication between two microcontrollers.
