What is the best product to clean concrete floors?

If you’re dealing with dirty concrete, one of these products should be able to help.

  • BEST OVERALL: Zep Neutral pH Floor Cleaner Concentrate ZUNEUT128.
  • BEST BANG FOR THE BUCK: Sunnyside 64216 TSP All Purpose Cleaner.
  • BEST ECO-FRIENDLY: ACT Concrete Cleaner.

How do professionals clean concrete floors?

How to Clean Concrete Floors

  1. Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop.
  2. Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section.
  3. Mop up in sections.
  4. Dry.

How can I make my concrete white again?

Apply vinegar or bleach to the discolored areas. If you use vinegar, do not dilute it. Pour it onto the concrete and scrub it into the surface with a scrub brush. If the discoloration starts to fade, repeat until it disappears completely.

How do you clean dirty concrete floors?

If a concrete or concrete-block surface is especially dirty, add detergent and a quarter cup of ammonia to a bucket of warm water and brush the solution over the surface with a stiff nylon brush. (Never use a metallic brush; metallic fibers can get trapped in the concrete and rust.)

How do you clean unsealed concrete floors?

How to Clean Unsealed Concrete Floors

  1. Sprinkle sawdust on grease and oil stains.
  2. Sweep the floor with a push broom.
  3. Dust mop or vacuum the floor.
  4. Apply detergent and water on the stains.
  5. Scrub the stained spots with a brush.
  6. Mop with a baking soda solution.
  7. Rinse and wipe the floor dry.

How do you clean rough concrete floors?

Mix a gallon of warm water with 2 or 3 ounces of trisodium phosphate and pour it directly over any difficult stains on your concrete. Use your wire brush to scrub the concrete surface and then rinse with water. You can find trisodium phosphate, or TSP, for sale in home improvement stores.

Can you clean concrete with OxiClean?

Although it’s possible to scatter the OxiClean powder on the wet concrete and then scrub with a stiff broom, you’ll probably get a more uniform result by mixing the powder with water first. Use four scoops of powder per gallon of water. During that time, you can scrub the concrete to make the cleaning more effective.

What is the best way to clean basement concrete floors?

Mix a quarter cup of ammonia, a few squirts of dish soap, and water in a bucket. Use a nylon scrub brush with stiff bristles to scrub the cleaning solution onto the concrete floor. If your basement has a built-in drain, pour the cleaning solution directly onto the floor stains.

How do you clean an old concrete basement floor?

How To Clean Your Concrete Basement Floor

  1. Start By Removing As Much As You Can From The Floor.
  2. Thoroughly Sweep Or Vacuum To Remove Debris.
  3. Treat Any Stains.
  4. Scrub Your Floor With Your Chosen Cleaning Product.
  5. Thoroughly Rinse Your Floor.
  6. Let The Floor Dry Thoroughly Before Returning Furniture And Using The Room.

What should you use to clean unpainted concrete floors?

Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners. Mix a solution, apply to floor with a wet mop and then rinse with a mop dipped in clean water. To make your concrete floors resistant to future stains, apply a concrete sealant.

How do you clean raw concrete floors?

How to Clean an Unsealed Concrete Floor

  1. Sprinkle sawdust or cat litter over any oil or grease spots on the concrete.
  2. Sweep all debris from the concrete floor with a push broom.
  3. Sprinkle powdered dishwasher detergent on the stain.
  4. Pour boiling water over the detergent after soaking.

What kind of cleaner is best for concrete floors?

Industrial strength cleaner for concrete surfaces. This product is ideal for high use shops, industrial floors, garage floors and commercial locations. 100% biodegradable and environmentally friendly.

What can industrial concrete cleaner be used for?

Its’ uses can encompass anything from industrial floor cleaning to mechanic shop floors and even hot dip tank cleaning. This highly effective, ultra-concentrated formula is a non-flammable detergent that dissolves a wide range of greases and oil-based soils.

How big of a dilution do I need for concrete floor cleaner?

Suggested dilution is 4:1 for heavy degreasing, 8:1 for moderate cleaning and 1 cup per gallon for light cleaning. Product must be allowed to sit for 5 minutes and then completely rinsed. The concrete must be allowed to dry before coating. All Weather Floors Industrial Floor Cleaner – 55 Gallon.

How much industrial floor cleaner to use per gallon?

Suggested dilution is 4:1 for heavy degreasing, 8:1 for moderate cleaning and 1 cup per gallon for light cleaning. Product must be allowed to sit for 5 minutes and then completely rinsed. The concrete must be allowed to dry before coating. On Sale!: Our industrial floor cleaner a highly concentrated specifically for use on concrete.