What is the rake and eave of a roof?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Rake—The slanting edge of a gable roof at the end wall of the house. Ridge—The horizontal line at the top edge of two sloping roof planes.

What is the rake side of a roof?

Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.

What is the eaves of a roof?

The area where a roof extends a small way past the wall of a building is usually referred to as the eaves. Eaves are formed as the rafters of the roof extend past the side of the building to distribute and support the load of the roof more evenly.

What is the difference between an eave a rake and a ridge?

There is a difference between these two terms. The rake of a roof, as explained above, is the exposed portion on the sides of a gable roof that extends from the eave to the ridge of the sloped sides. It covers the top edge of a roof, while a roof rake is used for removing snow from the roof of a house.

What is a rake detail?

A rake is the sloped part of the end of the gable in gable roofs, or the trim for gables. Rakes are another area on the exterior of your home (in addition to soffits and fascia) that can be customized to match the trim of your home.

What is rake in construction?

A roof rake always angles down. Terms are used to break down the various areas of a roof and a “rake” is one of many roof sections. The rake is not exactly on the roof. It is a term that describes the sloped sides of a gable end. The rake can be flat with no overhang, or it can overhang the gable end like an eave.

What are raked eaves?

Raked eaves mean that theres a bit of mucking around for the builder when doing corners on a hip roof for example. Depending on blind sizes, etc, they could be mounted to facia/barge board instead of to walls. Even if you used raked eaves, is there enough room to mount the blinds to the walls? Like.

What is part of the eave system?

An eave is the edge of the roof that overhangs the exterior siding. Parts of an eave include the soffit, which is the underside of your roof’s eaves, and the fascia, the vertical facing board.

What are eaves and soffits?

In the widest sense of the term, soffits can refer to the underside of almost anything that’s constructed, including arches and porches. Another way to explain it is to say soffit is the exposed siding underneath your roof’s overhang. To summarise, an eave is part of a roof system and a soffit is part of the eave.

What is the rake board on a house?

March 22, 2013. Rake board gives your roof and the eaves the finished look you want to really enhance the ambiance of the exterior appearance. This is the name given to the board that you place on along the slope of the roof of your home.

What are eaves and valleys?

Undereave vent – Intake vents located under the eaves of the roof that help draw cool dry air into the attic. Underlayment – A layer of protective material between the deck and the shingles. Valley – The intersection of two sloping roofs joining at an angle to provide water runoff.

What does an eave look like?

An eave is the edge of a roof that sticks out or hangs over the building’s side. Sometimes they’re over exposed rafters. The horizontal underside of the eave is sometimes called a soffit. If the eave has a board running vertically along its end that covers the rafters, that board is a fascia.

What is meant by “the rake of the roof”?

The rake of the roof is the exposed outer portion of a gable roof that extends from the eave to the ridge. Drip edge is also installed along the rake.

What is the purpose of a rake Board on a roof?

The purpose of installing rake board is to prevent any roof damage from running or leaking water behind the siding. Moisture is the most common problem, given the purpose of the rake itself. It is necessary to do frequent check for any damaged, cracked, or rotting rake boards that installed on your house.

What then is the rake of a roof?

Terms are used to break down the various areas of a roof and a “rake” is one of many roof sections. The rake is not exactly on the roof. It is a term that describes the sloped sides of a gable end . The rake can be flat with no overhang, or it can overhang the gable end like an eave.

What is the rake of a roof?

Rake on the roof is the exposed outer portion of a roof to a roof extending from the infinity to the ridge . Oct 19 2019