Where can I get my water tested in NC?
Wells: Testing your Private Well Water Private well water samples can be submitted to the State Lab through the local health department. The test results are returned to the local health department within three (3) weeks.
What tests are performed on the water samples collected?
The most important tests used in water-quality surveillance or quality control in small communities are those for microbiological quality (by the measurement of indicator bacteria) and turbidity, and for free chlorine residual and pH where chlorination is used.
How long does it take to get well water test results?
How long will it take to get the results? Some laboratories may take as long as two weeks to return your results. For typical results, Clean Water Testing will usually return your results within three to five business days. Q.
What tests should I do on my well water?
At a minimum, check your well every spring to make sure there are no mechanical problems; test it once each year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well.
How do you conduct a water analysis?
pH Testing Procedure
- Rinse each test tube with the water sample.
- Fill the tube to the 5mL line with sample water.
- While holding a dropper bottle vertically, add 10 drops of Wide Range Indicator Solution.
- Cap and invert several times to mix.
- Insert the tube into the Wide Range pH Comparator.
- Record the pH value.
How often should well water be tested?
When should I have my well tested? You should have your well tested once a year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well.
Where do you get a drinking water test in NC?
Drinking water analyses must be performed by a laboratory certified by the North Carolina State Laboratory of Public Health. *Note: Laboratories are certified to conduct a certain number of tests but may not be certified to conduct every test required of a water system.
Where can I find the results of my water test?
Visit the Information Hub Results of drinking water tests for microorganisms. Water samples from both public and private water systems are examined. A private water system (homeowner) can obtain chemical analyses from the State Laboratory through the local health department.
What kind of tests are done on non drinking water?
Samples of non-drinking water, such as those from lakes, streams, rivers, and ponds, that are submitted by health departments may also be examined for total and fecal coliform bacteria to determine the degree of contamination.
How long does it take to test private well water?
Wells: Testing your Private Well Water Private well water samples can be submitted to the State Lab through the local health department. The test results are returned to the local health department within three (3) weeks.
