Where do I put tar MD5 in Odin?

(It will depend on which USB port on your computer you plugged the device cable into.) There will be a COM port indicated in Odin, and the MD5 file will be in the AP box.

How install Stock ROM after custom ROM?

How to Flash a Stock ROM

  1. Find a stock ROM for your phone.
  2. Download the ROM to your phone.
  3. Back up all your data.
  4. Boot into recovery.
  5. Select Wipe to factory reset your phone.
  6. From the recovery home screen, select Install and navigate your way to the stock ROM you downloaded.
  7. Swipe the bar to begin installation.

How long is Odin mode?

The time it takes for the Odin mode to install your files is totally dependent on what you are installing. If you are flashing full stock firmware, which is longer than an application package, it should take about 15 minutes after starting to flash.

How do I fix Odin stuck on setup connection?


  1. use an official Samsung cable.
  2. unplug all unneeded usb devices.
  3. reboot into download mode again.
  4. connect to a usb 2.0 port on the back of the pc.
  5. run odin as an admin.

What is bl and AP in Odin?

BL stands for bootloader. AP represents the system partition (possibly stands for Android partition); under previous Odin versions, this was called “PDA” CP represents your modem.

How do I download phone firmware?

How to download Samsung firmware

  1. Go to Settings.
  2. Scroll down and tap Software update.
  3. Tap Download and install.
  4. Follow the steps to install the update if one is available. If not, it will say your phone is up to date.

How do I install Odin on my Samsung Galaxy phone?

Open the extracted folder (e.g. Odin3 v3.13.1) and double-click on ‘ Odin3.exe ‘ file. Connect the Samsung Galaxy device to the PC while it is in Download Mode. The COM port should light up in the Odin window. Click on the ‘AP’ button and select the firmware file starting with AP.

How to flash stock ROM in Samsung Galaxy S4 via Odin?

First back up all your data for safety in case the process corrupt all the data. Next you need to download and install Samsung Mobile Driver, Samsung Kies if you do not have any. Download the firmware file for your device. Click here to download the firmware. Unzip it only once. Download odin3 and then unzip it.

How to install Samsung stock firmware using Odin flash tool?

How to install Samsung Stock Firmware using Odin Flash Tool Step 1: Download Official Firmware for Samsung from the given source and extract it on your computer. Step 2: Download Odin Software and install it on your computer. Step 3: Turn off your phone. Step 4: Open Odin on your computer and connect your device while in download / Odin mode.

How do you flash a ROM on Odin?

Click on the “Start” button and the flashing progress will be started on the Odin tool. Step 9. Leave your PC for like 5-10 minutes and the process will be completed successfully. Odin will show you the “Pass!” message indicating the flashing is completed.