Where is the radiator drain plug on a 99 Jeep Cherokee?
Put on your safety glasses and crawl under the Jeep on a creeper to locate the radiator drain plug. On a 4.0 liter engine, it will be on the right (passenger side) side of the inside of the radiator and on a 4.7 liter engine, it will be on the left (driver’s side) side of the inside of the radiator.
How do you flush a radiator on a Jeep Cherokee XJ?
Remove the bottom radiator hose from the water pump (very easy if the plastic air filter box is removed 1st). Stick a garden hose in the heater hose and flush. Stick the garden hose on the heater hose nipple on the thermostat cover and flush. Stick garden hose in the top radiator hose and flush.
How do you flush a clogged radiator?
How to Properly Clean a Clogged Radiator
- Let the engine cool.
- Put a bucket underneath the radiator.
- Remove the cap and fill the tubes with radiator flush.
- Let flush solution simmer in the radiator.
- Flush out the solution with water.
How do you drain the coolant on a 1999 Jeep Cherokee?
Jeep Grand Cherokee 1999-2004: How to Flush Your Radiator
- Step 1 – Drain old coolant. Open the radiator’s cap on top of the radiator, under the hood.
- Step 2 – Flush radiator. After you’ve let all the coolant drain from the radiator and into the container, tighten the drain plug.
- Step 3 – Fill radiator with coolant.
How do you flush a Jeep radiator?
Flush the Radiator Remove the radiator cap and pour distilled water into the radiator until full. Replace the cap, then start up the vehicle and let it run for 10 to 15 minutes. This will work the distilled water into the engine, flushing out any loose debris or corrosion along with the last of the old antifreeze.
How do you drain the coolant reservoir in a Jeep Grand Cherokee?
Open the radiator’s cap on top of the radiator, under the hood. Locate the radiator’s drain plug under the radiator. It’s located on the bottom of the radiator on the passenger’s side. Place the large container underneath it to collect the old coolant, and loosen it by twisting it counterclockwise.
Can you drain the radiator on a Jeep Grand Cherokee?
Draining and filling your radiator is a low-line maintenance procedure with the understanding that you’re not replacing all the coolant in your system. To properly remove and replace coolant from any vehicle, follow these steps. Do not drain the coolant from your Jeep Grand Cherokee until the engine and coolant have cooled down.
Where is the drain plug on a Jeep Grand Cherokee?
On a 4.0 liter engine, it will be on the right (passenger side) side of the inside of the radiator and on a 4.7 liter engine, it will be on the left (driver’s side) side of the inside of the radiator. Once you’ve located the drain plug, loosen it slightly to manipulate with your fingers only.
How do you remove coolant from a Jeep Grand Cherokee?
To properly remove and replace coolant from any vehicle, follow these steps. Do not drain the coolant from your Jeep Grand Cherokee until the engine and coolant have cooled down. This is not something you should attempt to perform after taking a trip to the parts store to get more coolant to replace or any other errands.
